John Deere 4044M, 4044R, 4049M, 4049R, 4052M, 4052R, 4066M and 4066R Compact Utility Tractors (SN. from 010001) Technical Manual (TM131019)

Table of Contents:
   Introduction
      Foreword
   General Information
      Safety
      General References
      Technical Specific References
      Fuel and Lubricants
      Serial Number Locations
   Engine Repair
      Engine
      Cooling System
   Fuel, Air Intake, and Exhaust Repair
      Fuel
      Air Intake
      Exhaust
   Electrical Repair
      Electrical Connector Repair
      Battery, Starter, and Alternator
      Electrical System Components
   Drive Systems and Transmission Repair
      Power Train
      Mechanical Front Wheel Drive
      Differential
      PTO
   Steering Repair
      Steering
   Brake Repair
      Brake
   Hydraulics Repair
      Hydraulic Pump and Filter
      Rockshaft
      Range Control and Three Point Hitch
      Selective Control Valve
      Hydraulic Lines
   Miscellaneous Repair
      Hood and Side Panels
      Fenders
      Wheels
   Cab/Open Operator`s Station Repair
      Seat and Support
      Control Console
      Roll-Gard
      Cab Components
      Open Operator Station Components
   Diagnostic Trouble Codes
      General References
      Engine Control Unit (ECU) Diagnostic Trouble Codes
      Instrument Cluster Control (ICC) Diagnostic Trouble Codes
      Power Train Hydrostatic (PTH) Control Unit Diagnostic Trouble Codes
      Power Train Reverser (PTR) Control Unit Diagnostic Trouble Codes
      Hitch Control Center (HCC) Control Unit Diagnostic Trouble Codes
      Selective Control Valve (SCV) Control Unit Diagnostic Trouble Codes
   Observable Symptoms and System Diagnostics
      General References
      Engine System Diagnostics
      Fuel, Air Intake, Exhaust, and Cooling System Diagnostics
      Electrical System Diagnostics
      Electronic Control Unit System Diagnostics
      Drive Systems and Transmission System Diagnostics
      Steering System Diagnostics
      Brakes System Diagnostics
      Hydraulic System Diagnostics
      Cab/Open Operator`s Station System Diagnostics
   Engine Operation, Test, and Adjustments
      General References
      Calibrations, Preliminary Checks and Operational Checks
      Theory of Operation
      Tests and Adjustments
   Fuel, Air Intake, Exhaust, and Cooling Operation, Test, and Adjustments
      General References
      Calibrations, Preliminary Checks and Operational Checks
      Theory of Operation
      Component and Connector Information
      Tests and Adjustments
   Electrical General and Theory of Operation
      General References
      Electrical Theory of Operation
   Electrical Schematics
      General References
      Starting and Charging-With ECU (SE1A)
      Starting and Charging-Without ECU (SE1B)
      Lighting-Without License Light (SE2A)
      Lighting-With License Light (SE2B)
      Brake Switch, Horn, and Rear Trailer Connector (SE2C)
      Cab Lighting-Without License Light (SE2D)
      Cab Lighting-With License Light (SE2E)
      Instrument Control Cluster (ICC) (SE3)
      Engine Control Unit (ECU) (SE4)
      Transmission Control Unit (TCU) (SE5)
      Kits (SE6)
      Hitch Control Center (HCCA) (SE7)
      Cab (SE8)
      Selective Control Valve (SCV) Controller (SE9)
   Electrical Components and Connectors
      General References
      Electrical Assemblies, Modules, and Control Units
      Sensors
      Resistors-Condensors-Capacitors
      Memory and Binary Devices
      Lights
      Fuses
      Charging
      Monitoring-Warning Devices
      Relays
      Motors
      Switches
      Diodes
      Wiring Harnesses
      Interconnects
      Solenoids and Electrically Actuated Mechanical Devices
      Ground Points
   Electrical Tests and Adjustments
      General References
      Tests and Adjustments
   Electronic Control Units
      General References
      Calibrations, Preliminary Checks and Operational Checks
      Theory of Operation
      Component and Connector Information
      Test and Adjustments
      Instrument Cluster Control (ICC)
      Engine Control Unit (ECU)
      Power Train Hydrostatic (PTH)
      Power Train Reverser (PTR)
      Hitch Control Center (HCC)
   Drive Systems and Transmission Operation, Test, and Adjustments
      General References
      Calibrations, Preliminary Checks and Operational Checks
      Theory of Operation
      Schematics
      Component and Connector Information
      Tests and Adjustments
   Steering Operation, Test, and Adjustments
      General References
      Calibrations, Preliminary Checks and Operational Checks
      Theory of Operation
      Schematics
      Component and Connector Information
      Tests and Adjustments
   Brakes Operation, Test, and Adjustments
      General References
      Calibrations, Preliminary Checks and Operational Checks
      Theory of Operation
      Component and Connector Information
      Tests and Adjustments
   Hydraulics Operation, Test, and Adjustments
      General References
      Calibrations, Preliminary Checks and Operational Checks
      Theory of Operation
      Schematics
      Component and Connector Information
      Tests and Adjustments
   Cab/Open Operators Station Operation, Test, and Adjustments
      General References
      Calibrations, Preliminary Checks and Operational Checks
      Theory of Operation
      Component and Connector Information
      Tests and Adjustments
   Service Tools
      General References
      Dealer Fabricated and Service Tools
      Section 240A
      Section 240B
      Section 240C
      Section 240D